|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The service was quick and simple, finding the service manual easy and it appears to be the original with colour schematics. It contained the info I was after and so sorted the problem.
I have copied it to CD and attached the envelope to the inside back cover of the owners manual. Good manual and excelent service. Robin Wood, Wood Electronics, New Zealand.
;
Exactly what was needed to assess the product - excellent value and great service
 ;
Nice to have the service manual for the Sony DCR-TRV345E now. The document is of excellent quality.
;
MACKIE HR824 26 pages English-only Service Manual contains:
1) HR824 technical overview with the description of front and rear panel switches.
2) HR824 specs
3) Block Diagram
4) Wiring Diagram
5) Packaging management
6) Spare part & final assembly list (for PCB rev A and B) + exploded view
7) Test Procedures (where, how to measure voltage...) including Test Point diagram on the PCB.
8) IC and Transistor charts.
Excellent guide: very clear, good scan quality enabling us to print readable diagram :-)
Note:
Mackie HR824 make extensive use of surface mount devices (SMD). Service on the HR824 must
only be undertaken by experienced service technicians with the right tools, experience and patience to perform surface mount rework when needed.
;
This Service manual is very well scanned and its clean to read, no any anti-theft words that un-english could understand. I got my CCD600 working with this manual and it´s clear shematics :)
4. SERVICE DIAGNOSIS CHART
COMPLAINT Cooling is impossible. POINTS TO BE CHECKED � Is the power cord unplugged from the outlet? � Check if the power switch is set to OFF. � Check if the fuse of power switch is shorted. � Measure the voltage of power outlet. � Check if the set is placed close to wall. � Check if the set is placed close to stove, gas � cooker and direct rays. � Is the ambient temperature high or � the room door closed? � Check if put in is hot. � Did you open the door of the set too often � or check if the door is closed up? � Check if the Damper Control is set to "cold-position". � Is foods placed in cooling air outlet? � Check if the control is set to "cold-position". � Is the ambient temperature below 5°C? � Is liquid food stored? � Check if put in is hot. � Did you open the door of the set too � often or check if the door is closed up. � Check if ambient temperature and humidity of surroumcling air are high. � Is there gap in the door packed? � Are the set positioned in a firm and even place? � Are any unnecessary objects set � in the back side of the set? � Check if the Tray Drip is not firmly fixed. � Check if the cover of mechanical room � in below and front side is taken out. To close the door is not handy. � Check if the door packing is dirty � with filth such as juice. � Is the set positioned in a firm and even place? � Is too much food putted in the set? Ice and foods smell unpleasant. � Check if the inside of the set is dirty. � Did you keep smelly foods without wrapping? � It smells of plastic. REMEDY � Plug to the outlet. � Set the switch to ON. � Replace a regular fuse. � If voltage is low, wire newly. � Place the set with the space of about 10cm. � Place the set apart from these heat � appliances. � Make the ambient temperature below. � Put in foods after cooled down. � Don't open the door too often and close � it firmly. � Set the control to mid-position. � Place foods in high temperature section. � (Front Part) � Set the control to "mid-position". � Set the control to "warm-position". � Seal up liquid foods with wrap. � Put in foods after cooled down. � Don't open the door too often and close � it firmly. � Wipe dew with a dry cloth. This occurrence � is solved naturally in low temperature and humidity. � Fill up the gap. � Adjust the Adjust Screw, and position � in the firm place. � Remove the objects. � Fix it firmly on the original position. � Place the cover at the original position. � Clean the door packing. � Position in the firm place and adjust the � Adjust Screw. � Keep foods not to reach the door. � Clean the inside of the set. � Wrap smelly foods. � The new products smells of plastic, but it is � eliminated after 1-2 weeks.
Cooling ability is poor.
Foods in the Refrigerator are frozen. Dew or ice forms in the chamber of the set. Dew forms in the Exterior Case.
Abnormal noise generates.
q
In addition to the items described left, refer to the followings to solve the complaint. Check if dew forms in the Freezer. Defrosting is poor. Replace the Components of defrosting circuit.
Check Refrigerating Cycle.
The cycle is faulty.
Repair the cycle.
Check the Damper Control
The operation of the Damper Control is poor.
Replace the Damper Control
- 19 -
|
|
|
> |
|
